After the CNC machine is powered on normally, you should pay attention to the mechanical and electrical joint adjustment: 1. In the JOG mode, the positive and negative jog operations of each coordinate axis are performed, and the operation is correct, and then the simple program is tried in the AUTO mode. 2. When the main shaft and the feed shaft are tested, the speed should be low and then the speed should be tested. 3. Press the overtravel protection switch to verify the reliability of the protection function, and then perform the slow overtravel test to verify the correctness of the overtravel block installation. 4. After the manual operation is correct, complete the return operation of each axis. Before returning the parameters, return the axis away from the reference point for a distance. Do not return the reference near the reference point to avoid finding the reference point. 5. When conducting the knife selection test, first adjust the knife number to observe whether the tool change operation is correct or not, and then exchange the real knife after correct. 6. Compile a workpiece machining program by yourself, including as many function commands and auxiliary function commands as possible. The displacement size is limited to the maximum stroke of the machine. At the same time, the program is added, deleted and modified. Finally, run the program to see if the machine is working properly.
USB Slip Rings are an increasingly popular way to provide power and data to rotating devices. By using a slip ring, you can avoid having to run cables through a hole in the device's enclosure, which can be difficult and messy. USB slip rings also provide a convenient way to update firmware or change settings on the device without having to open the enclosure. It is commonly used in applications where there is a need to send or receive data or power between a stationary object and a rotating object, such as in an industrial setting where a machine needs to be powered while it is still in use.
Oubaibo's USB Slip Ring, Rotary Swivel Joint manufacturer, chooses the high-quality Senring slip rings, and fiber Rotary Joint products. The company has been in business for many years and is a leading supplier of quality slip ring products. They offer a wide range of products, including high-quality sending slip rings, fiber rotary joints, and more. Their products are affordable and of the highest quality. They are a great supplier for those looking for quality slip ring products.
Usb Slip Ring,Rotary Swivel Joint,Senring Slip Rings,Fiber Rotary Joint Dongguan Oubaibo Technology Co., Ltd. , https://www.sliproub.com