Notice of the Ministry of Housing and Urban-Rural Development of the People's Republic of China No. 141 Announcement on the release of the industry standard "Design Specification for Urban Night Lighting" The “City Night Lighting Design Code†is now approved as the industry standard, numbered JGJ/T 163-2008, which will be implemented from May 1, 2009. Ministry of Housing and Urban-Rural Development, People's Republic of China Foreword According to the requirements of the Ministry of Construction's "Notice on Printing and Distributing" (Jianbiao [2004] No. 66), the preparatory group conducted in-depth survey and analysis of a large number of night lighting projects and normative documents at home and abroad, and carefully summarized practical experience. This specification has been developed on the basis of extensive solicitation of opinions. Content 1 General..............................................................................1 Editor: China Lighting Network Feng Yaoyuan
1.0mm Ribbon Connector is commonly used in electronic devices to connect ribbon cables. It is a type of connector that has a pitch of 1.0mm, which means that the pins are spaced 1.0mm apart. This connector is designed to be used with ribbon cables that have a similar pitch.
The 1.0mm Ribbon Connector is typically used in applications where a high-density connection is required. It is commonly used in computer systems, printers, and other electronic devices that require a high-speed data transfer.
1.0Mm Ribbon Connector,Flat Cable Connector,Flat Ribbon Cable Connector,Flat Ribbon Connector YUEQING WEIMAI ELECTRONICS CO.,LTD , https://www.weimaiconn.com
This specification is published by China Construction Industry Press, organized by the Institute of Standards and Ratings.
November 4, 2008
The main technical contents of this code: general rules, terminology, basic regulations, lighting evaluation indicators, lighting design, lighting energy saving, light pollution restrictions, lighting power supply and distribution and security.
This Code is managed by the Ministry of Housing and Urban-Rural Development. The China Academy of Building Research is responsible for the interpretation of specific technical contents (Address: 19 Chegongzhuang Street, Xicheng District, Beijing; Institute of Building Physics, China Academy of Building Research; Zip Code: 100044) .
The chief editor of this specification: China Academy of Building Research
Participated in the specification: Beijing Architectural Design and Research Institute Tianjin University School of Architecture Qing University Building City Planning Institute Beijing Lighting Society Shanghai Lighting Society Toshiba Lighting (Beijing) Co., Ltd. Osram (China) Lighting Co., Ltd. Shanghai Tongyin Lighting & Sound Engineering Co., Ltd. Shanghai Guangmaoda Lighting Landscape Engineering Co., Ltd. Shenzhen Gaolite General Electric Co., Ltd. International Copper Association (China)
The main drafters of this code: Zhao Jianping, Xiao Huiqian, Li Jing, Shen Tianxing, Wang Meng, Yang Chunyu, Wang Dayou, Li Tie, et al, et al, et al.
2 Terminology.............................................................................. 2
3 Basic regulations........................................................................6
3.1 Principles of ..................................................................6
3.2 Selection of illumination source and its electrical accessories..........................................6
3.3 Lighting Fixture Selection............................................................7
4 Lighting evaluation indicators..................................................................8
4.1 Illuminance or brightness............................................................8
4.2 Colors........................................................................8
4.3 Uniformity, contrast and three-dimensionality................................................9
4.4 Limitations of glare............................................................9
5 Lighting Design........................................................................10
5.1 Buildings..................................................................10
5.2 Structures and special landscape elements................................................12
5.3 Commercial Pedestrian Street............................................................13
5.4 Squares........................................................................14
5.5 Parks........................................................................15
5.6 Advertising and Logo............................................................16
6 Lighting energy saving........................................................................18
6.1 Lighting Energy Saving Measures............................................................18
6.2 Illumination Power Density Value (LPD)................................................18
7 Limitations of Light Pollution..................................................................20
8 Lighting Power Supply and Distribution and Safety............................................................23
8.1 Lighting Power Supply and Distribution............................................................23
8.2 Lighting Control..................................................................24
8.3 Safety protection and grounding......................................................24
Appendix A Division of Urban Size and Environmental Areas..........................................26
Appendix B Calculation, Measurement and Use of Semi-Cylinder Illumination..........................................27
Appendix C Division of the pool and fountain area..........................................29
The terminology used in this specification..................................................................31
Attachment: Article Description........................................................................33
Urban night lighting design specification.rar